Uncategorized

How to Get Rid of Mould

You want to know how to get rid of mould? Every home can be infested with it so this article have compiled the most effective ways of eliminating the small infestations as well as the bigger ones that have already gotten out of hand. Read this further and learn some very helpful tips and tricks.

What is Mould and Why Does it Occur on Walls?

A mould is basically a type of fungus that shows from airborne spores and it grows in warm, damp conditions without enough airflow and it is often seen in bathrooms and loft spaces. Aside from lack of ventilation, it can also be caused by plumbing leaks and badly insulated heating pipes building moisture from the surface of the walls. If you don’t know how to get rid of mould, this article will provide with you with the most effective methods so continue reading the next few paragraphs.

How to Get Rid of Mould

How to Get Rid of Mould in Walls

Just a word of caution before starting with the methods of how to get rid of mould: this fungus can cause poor health and allergic reaction so in case you have an extensive problem with this fungus, might has well hand the job to the experts. If the area that you’ll need to tackle is just small and you want to do the job yourself, make sure to wear gloves, a face mask and a protective eyewear to prevent harm when contacting with spores. Here we go with a few solutions for moulds.

  • Bleach. When thinking of the most effective products that you can use on how to get rid of mould, bleach is one of those that come to mind first. It kills virtually all moulds that it comes in contact with to leave a sanitized surface that is already resistant to mould growth in the future. To kill mould, use a ratio of one cup of bleach for every gallon of water and apply the solution to the surfaces with infestation using a spray bottle or sponge. Unless the surface is used for food preparation, you don’t have to rinse it.

 How to Get Rid of Mould

  • Borax. There are a lot of advantages of using this product on how to get rid of mould and this natural cleaning product works perfectly for starters. To kill and totally remove mould, come up with a cleaning solution by adding water to borax. Scrub this solution to the infested surfaces using a brush and wipe up any extra moisture, dust or debris to avoid spreading mould into the air once the surface goes dry. Just like bleach, you don’t have to rinse this solution. Leave it on the surface of the wall to prevent further mould growth.

How to Get Rid of Mould

  • Vinegar. A mild acid that kills more than 80% of mould species, this is one of the safest products to use on how to get rid of mould. This is non-toxic and has no dangerous fumes which are present in a bleach. To remove mould with this ingredient, pour some vinegar in a spray bottle and spray it directly in the surfaces that are infected by moulds. Leave it to sit on the wall for an hour or two before wiping the surface. Clean with water and let it dry completely. As for the smell, it can be pretty nasty but don’t worry too much about it because it will just wear off after a few hours. Repeat this process every other 2-3 days to make sure that mould doesn’t grow in the surfaces again.

 How to Get Rid of Mould

  • Baking Soda. How to get rid of mould with this ingredient? You’ll never go wrong with this natural ingredient that is considered as aksafe and effective product to use to kill moulds. Fill a spray bottle with water and add one tablespoon of baking soda on it.Shake the bottle well to dissolve the powder and spray it in the surfaces with moulds. Scrub the areas with a brush to make sure that all of moulds from the surface are removed. After scrubbing the moulds away, spray the the area again and allow the wall to dry. Repeat this process as often as you can to avoid the moulds from building up again.

How to Get Rid of Mould

  • Hydrogen Peroxide. This product can effectively kill viruses and bacteria including moulds. It penetrates in the mouldy surfaces better than bleach making it ideal for use in fabric and wood. Pour hydrogen peroxide in a spray bottle and directly apply on the moulds. Allow it settle on the surface for at least 10 minutes then scrub the area. When using this product on how to get rid of mould, keep in mind that this has a mild bleaching effect which might lighten the color of fabrics. To see how it works on fabrics, do at test spot first before applying it.

How to Get Rid of Mould

How to Prevent the Occurence of Mould

Aside from learning how to get rid of mould, it’s also very important that you have a good idea how to prevent it. Mould can grow anywhere—in clothing, carpet, leaking pipes, floor tiles and bathroom walls. If your house doesn’t have mould yet, make sure that you prevent it from building up and if you’re worried that you don’t know what to do to preven it, here are a few tips:

How to Get Rid of Mould

  • Repair damaged gutters immediately, if any.
  • Install mould-resistant products in the problem areas.
  • Prevent moisture with proper ventilation.
  • Direct water away from the problem areas in your house.
  • Regularly clean the roof gutters in your home and inspect them from damage too.
  • Increase airflow by opening doors between rooms and moving furniture further from the walls.
  • Keep mould off of your indoor plants by adding a bit of taheebo to the water that you use in watering them. This should help your plant withstand and hinder the growth of moulds.
  • The kitchen is one of the areas where mould builds up first so when cooking, open a window or run an exhaust fan and keep the sink dry after washing dishes.

If Moulds on Walls Return

After trying the suggestions above on how to get rid of mould and you and you successfully remove mould, try your best to prevent it from coming back. Do not panic in case you see moulds return though because it is a common occurence that you can’t do too much about. What’s important is that you are now equipped with the knowledge on how to effectively deal with them.