Uncategorized

How To Get Rid Of Mold

Black mold is common in many households as it thrives on moist environments and many cellulosed-based materials. Although a few mold species are dangerous, this kind is pretty safe but it cause discomfort for numerous home owners.

Isolating The Area

How To Get Rid Of Mold

If you want to know how to get rid of mold and prevent the spread of spores inside your home especially during the whole cleanup process, keep in mind that the area affected must be isolated from the other spots with the use of a plastic sheet. For best results, it is recommended to maintain the area under negative pressure so that the molds cannot migrate to the living quarters.

Place plastic linings all over the walls and floor adjacent to where the mold spores are. Additionally, vents, windows, doors, and other openings should also be covered with plastic in order to reduce the molds which will mix into the open air.

Use Protective Equipment

How To Get Rid Of Mold

Before beginning the entire mold removal process, make sure that you protect yourself first. Secure a mask and place it over your mouth and nose and wear plastic or rubber gloves. Keep in mind that mold spores can irritate your eyes and skin, which is why you should be equipped with goggles, too.

If the case of black mold is already severe, use a breathing respirator instead of a simple mask. While cleaning, do not use a fan or vacuum. These devices will produce air movement which is unfiltered, thereby spreading the mold spores inside the house.

Renting a HEPA vacuum is also advisable because these special equipment have filters which are especially designed to remove all toxins and allergens.

The Bleach Method

How To Get Rid Of Mold

If you are dealing with surface mold spores, you need a bucket full of cleaning solution and another one with bleach solution. If you are wondering how to get rid of mold and the kind of chemicals that you need to use, biocides like sporicidin will work in killing spores found in the severely affected areas. Take separate bottles. Fill one with 250 ml bleach and 4 liters of water and the other with warm, clean water.

For visible molds, spray them with the bleach solution. Make sure to douse the whole area and scrub the location with disposable rags or paper towels.

After using the rags for scrubbing mold spores, make sure that you do not reuse or save them. Discard all the garbage by putting them inside heavy-duty garbage bags.

Once the bleach solution has been allowed to sit for fifteen to twenty minutes, use the HEPA vacuum in cleaning off dead mold bodies and spores. For every square foot, it is recommended that you vacuum for at least one minute. Similar to the rags, the vacuum filters should also be disposed in heavy-duty bags and thrown out.

Finally, once you are satisfied with the way you cleaned your space, it is time to clean up. Flush all the excess bleach solution and water down the flood drain, utility sink, and toilet. Do not forget to wash your clothes cautiously .